Find Product Key for Windows and Office

Find Product Key for Windows and Office

If you are looking for a way to retrieve the product keys of your MS Windows or MS Office, you are on the right page!

The following is a tool to detect the product keys of Microsoft Windows and Microsoft Office installed on your machine. This tool is free to download at Magical Jelly Bean.

Here’s a screenshot

The tool also provides some nice features let you change your Windows product key, or detect the key remotely to another computer.

Block Or Unblock Websites without software !

Block Or Unblock Websites without software !

Many times in schools, colleges & offices surfing some sites like orkut,etc are banned !

To overcome this you can unblock these or block some other websites and play pranks !

Do The Following :

For eg you want to block www.xyz.com !

* Open the folder C:\WINDOWS\system32\drivers\etc

* There you will find a file named HOSTS

* Click on the file and press SHIFT and now right click on it .

* From the right click menu select Open with .

* Now, select Notepad to open the file from the list !

* Now, in the file under the line 127.0.0.1 localhost add another line as 127.0.0.2 www.xyz.com.

* Now, File>>Save !

How To Disable Windows Genuine Advantage Notification in 3 Simple Steps

How To Disable Windows Genuine Advantage Notification in 3 Simple Steps:

Following three simple steps now you can get rid of the pesky and sometimes buggy Windows Genuine Advantage (WGA) notifications:

1. Reboot Windows in safe mode (hold the f8 key while booting and you will get the option to boot in safe mode) and then:

2. Open Registry Editor (regedit.exe) and search for wgalogon folder and delete it. You should backup up the registry beforehand, in case somethiong goes wrong.

3. In your windows directory search for files wga* and delete them.

You are done!

Now reboot back normally and continue your work. Windows Genuine Advantage will not bother you anymore.

Warning: Use at your own risk. Backup everything before you do.

Start computer in 10 seconds

Start computer in 10 seconds

Right heres what u have to do to turn ur pc on in 10 seconds :



Click on the start button then press R it will take u to Run well go to runand type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex
now there find the Key Called
“Startup Delay”
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You’ll See The Result

Admin Password Recovery

Admin Password Recovery

Admin Password Recovery

1. Insert Windows CD in your cd-rom and start your computer 2. Keep your eye on the screen messages for booting to your cd Typically, it will be “Press any key to boot from cd”

3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now

5. The Licensing Agreement comes next – Press F8 to accept it.

6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair it”

Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.

7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”

9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.

10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system 11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.

12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit.

Computer Reboot automatically and gives Stop Error 0x0000007E, BSOD error

Computer Reboot automatically and gives Stop Error 0x0000007E, BSOD error

Stop Error 0x0000007E After SP3 is installed , Gives BSOD Stop Error for a second and reboot again.Problem after installation of Windows XP Service Pack 3. Computer Restarts after start up, it prompts for a reboot. This process will continue unless the computer is started in Safe Mode. In Safe mode the computer boots correctly and everything seems fine.
This problem only appears on some systems after upgrading to SP3. This particular problem on systems that have been prepared with SysPrep. The sysprep image was created on an Intel based computer, and then the sysprep image is deployed on a Non-Intel system such as an AMD processor. In these cases, the registry entry for Intelppm is incorrectly set and causes the computer to go into a continuous reboot after the service pack has installed.

How Can I Solve This Problem?Follow these steps to resolve this issue with the computer not booting correctly after SP3 is installed.

1) Start your computer in Safe Mode.
2) Click on Start, Run, and type REGEDIT and press Enter. This will open the Registry Editor.
3) Click the pluses (+) next to the following registry keys to navigate to the correct spot. HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesIntelppm

4) In the right hand column find the entry titled START and double-click on it
5) Change the number to 4 and click Ok
6) Close the Registry Editor
7) Shut down your computer and restart
This time the computer should restart normally and finish the installation of SP3.

Network Connections not showing up

Kindly try this to verify network settings and services, follow these steps: 

Verify that the correct network adapter is selected. A network adapter is a device that enables you to connect a computer to a network. It is also known as a network interface card (NIC). 

Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. 

Double-click Network adapters, and then verify that the correct network adapter name is selected. If you do not know the name of your network adapter, don't worry. For now, just make sure that an adapter is selected. 

Double-click the network adapter, and then verify that the "This device is working properly" message appears in the Device status box on the General tab. If you do not see this message, click Troubleshoot, and follow the directions. 
After you confirm that the correct network adapter is selected and is working properly, you can close all the open dialog boxes. 

Verify that the necessary services are started. The Services settings simply direct the system to stop, start, and administer system services. 
Right-click My Computer, and then click Manage. 
Double-click Services and Applications, and then click Services. 

In the right pane, look at the Status column. You may need to expand the box so that you can see all the columns. Make sure that the following services are started: 
Remote procedure call (RPC) 

(This service must be started before other services can take effect.). 
Network Connections 
(This service can only start if the RPC service is active.) 
Plug and Play 
COM+ Event System 
(This service can only start if the RPC service is active.) 
Remote Access Connection Manager 
(This service can only start if Telephony service is active.) 
Telephony 
(This service can only start if the RPC service and the PnP Service are active.) 
To start a service, right-click the service name, and then click Start. 
Do not close the Computer Management box because you will need to check additional settings in the remaining steps. 

Verify the logon setting. 
In the right pane, double-click COM+ Event System service. 
Click the Log On tab. 
Under Log on as, verify that the Local System account is selected. 

Verify the desktop interaction setting. 
Double-click the Network Connections service. 
Click the Log On tab. 
Under Log on as, verify that the Local System Account option is selected. 
Verify that the Allow service to interact with desktop check box is selected, and then click OK. 

Close the Computer Management box. 
Verify the network services setting. 
Click Start, and then click Control Panel. 
Double-click Add or Remove Programs. 
Click Add/Remove Windows Components. 
Scroll down and then click Networking Services, and then click Details. Verify that Simple TCP/IP Services is turned on, and then click OK. 
Close all the open dialog boxes. 

Verify that the network DLL files are registered correctly. DLL files are small files that include a library of functions and data that can be shared across multiple applications. 

Click Start, and then click Run. 
In the Run box, type cmd.exe, and then click OK. 
Type the following lines. Press ENTER after you type each line. This command text is difficult to type. Be sure that you type it exactly as it appears below. Or you may find it easier to copy and paste the text instead. Click OK when the RegSvr32 dialog box appears for each command. 

regsvr32 netshell.dll 
regsvr32 netcfgx.dll 
regsvr32 netman.dll 

Restart the computer. Check to see whether your networking icons appear. If this method worked for you.